V1.10D 50KHz – 2GHZ Malachite SDR Radio Malahiteam DSP SDR Receiver AM/SSB/NFM/WFM+Speaker + Battery +Metal Case + Expansion Board

Advantages:
1. 3.5-inch capacitive screen
2. Built-in rechargeable lithium battery
3. 4-layer PCB board. Better sensitivity
4. Built-in expansion board, medium wave and short wave performance is better than other version

Features:
– Malahiteam DSP SDR Receiver
– Capacitive touch screen
– Flash via USB cable
– Supported frequency range: 50KHz-2GHz (200MHz-400MHz is blocked by the author)
– Demodulation mode: AM, SSB, NFM, WFM

Product Parameters:
1) The radio is constructed based on the SDR principle, and the function is determined by loaded software
2) The frequency range is from 50KHz-2GHz
3) All types of analog modulation: AM, SSB (LSB USB), NFM, WFM
4) Powerful functions: variable filter width, adaptive noise suppressor, threshold noise suppressor, Noise Blanker (AGC_Equalizer)
5) Use fully functional chip msi001
6) Powerful stm32h743 with a clock frequency of 480MHz is applied
7) 3.5-inch IPS display with touch screen
8) There is a built-in UHF
9) Control 2 encoders with buttons and touch screen
10) The power supply is supplied by the external USB Type-C interface. The internal lithium battery has a large capacity of 2000mAH (suitable for outdoor use)
11) The current consumption when listening to headphones is 300mA
12) Built-in receiving module In order to improve the HF reception on the antenna, an additional board with a source follower has been developed. The board will be built into the standard receiver design
13) Connect to the computer via USB, you can transmit CAT, IQ and audio
14 160 kHz span, with scalability
15) Sensitivity-Under the condition of up to 250MHz, s / w is 0.3μV = 10dB.
16) Due to the characteristics of the msi001 chip used, the dynamic blocking range is about 85dB.
17) With backlight control
18) Built-in telescopic antenna, exclusive design
19) Product dimensions: 122*103*29.5cm

Design Details:

1: Brand new metal shell, available in black and white, with firm structure.

2: Optional full-function expansion board, medium wave and short wave, which still maintains good reception effect when using pull rod antenna. The expansion board attenuation chip adopts the original imported pe4213, non low price pe4302… 4306… Integrated antenna design, and the antenna type is consistent with the original through internal relay switching.

3: The motherboard adopts a well-designed four-layer gold sinking motherboard with military quality and ultra-low bottom noise.

4: The speaker has excellent sound quality and its own bass diaphragm. The bass is thick and the treble is clear.

5: The measured standby current of the host is only 290ua, the super large 3000ma battery, and the service life is not less than 8 hours.

6: The integrated CNC aluminum alloy knob adopts high-quality ec11 encoder, which has simple structure and good operability.

7: Select 3.5-inch touch screen with gorgeous color. The touch is sensitive and the touch interference is the lowest.

8: Support frequency range 50k-250m, 400M-2G. Supported modes are: USB, LSB, am, NFM, WFM, CW, DSB.

Package Included:
– 1 x Set of Malahiteam SDR Receiver